|
|
我是t61普屏 用 system updata 检测 可以更新bios 求 高人鉴定 这个能不能更新
Revision : 01
--------------------------------------------------------------------------------
Software Name BIOS Update Utility
Support models ThinkPad R61
- 14.1 inch widescreen models with IEEE 1394
Machine types and models:
7732-11x,12x,14x,1Ex,1Fx,4Rx,4Sx,4Tx,N4x,N5x,N8x,N9x,NAx,
NBx,NCx,NDx,NEx,P1x,X2x,X3x,X6x
7733-12x,13x,14x,15x,16x,17x,1Bx,1Cx,1Dx,1Ex,1Fx,1Mx,1Nx,
2Ax,2Dx,2Ex,2Fx,2Gx,2Jx,2Kx,2Lx,2Mx,2Nx,2Px,2Qx,2Rx,
2Sx,2Tx,3Ax,3Bx,3Cx,3Dx,3Ex,3Fx,3Gx,N5x,N6x,P1x,P2x,
P4x,PAx,PBx,XAx
7734-11x,12x,14x,15x,N3x
7735-12x,1Bx,1Cx,1Dx,1Ex,1Jx,XAx
7738-16x,17x,18x,19x,1Bx,1Cx,1Hx,1Mx,1Nx,1Px,1Rx,1Sx,1Tx,
1Ux,1Vx,21x,22x,P1x,P2x
7742-11x,12x,16x,NAx,NBx,NCx,X1x,X7x
7743-11x,12x,13x,14x,15x,17x,18x,19x,1Gx,1Hx,1Jx,1Kx,1Lx,
1Mx,2Ax,2Bx,2Cx,2Dx,2Ex,2Fx,2Gx,2Hx,2Jx,2Kx,3Bx,N3x,
N4x,N5x,N6x,P1x,P2x,P3x,P4x,P5x,P6x,P7x
7744-1Ax,P1x
7751-11x,12x,13x,1Gx,1Hx,1Jx
7753-2Xx
7754-2Xx
7755-11x,12x,13x,14x,15x,16x,17x,1Bx,1Dx,1Ex,1Fx,1Gx,1Hx,
P1x,P2x,P3x,P4x,P5x
ThinkPad R61i
- 14.1 inch widescreen models with IEEE 1394
Machine types and models:
7732-21x,22x,23x,24x,25x,26x,27x,28x,29x,2Ax,2Bx,2Cx,2Dx,
2Ex,2Fx,2Gx,2Hx,2Jx,2Kx,2Lx,2Mx,4Ax,4Bx,4Cx,4Gx,4Hx,
4Jx,4Kx,4Nx,6Ax,6Bx,6Cx,6Dx,6Ex,6Fx,6Gx,6Hx,6Kx,7Ax,
7Bx,7Cx,7Dx,7Ex,7Fx,7Gx,7Hx,7Jx,7Kx,7Lx,7Px,7Rx,8Ax,
8Bx,8Cx,8Dx,8Ex,8Fx,8Gx,8Hx,8Jx,8Kx,8Lx,8Mx,8Nx,8Px,
8Qx,8Rx,8Sx,8Tx,8Ux,8Vx,8Wx,8Yx,8Zx,9Ax,9Bx,9Cx,9Dx,
9Ex,B1x,B2x,B3x,B4x,B5x,B6x,B7x,B8x,B9x,BAx,BBx,BCx,
BDx,BEx,BFx,BGx,BHx,BJx,BKx,C1x,C2x,C3x,C4x,C5x,C6x,
C7x,C8x,C9x,CAx
7742-21x,22x,23x,24x,25x,26x,27x,28x,29x,4Lx,4Mx,7Mx,7Nx,
9Gx,9Hx,9Jx,9Kx,B1x,B2x,B3x,B4x,B5x,B6x,B7x,B8x,B9x,
BAx,BBx,BCx
ThinkPad T61, T61p
Operating Systems Microsoft Windows 7 32-bit
Microsoft Windows 7 64-bit (*1)
Microsoft Windows Vista 32-bit
Microsoft Windows Vista 64-bit (*1)
Microsoft Windows XP Home Edition, Professional
Microsoft Windows 2000
Refer to marketing materials to find out what computer models
support which Operating Systems.
Version 2.27-1.08
*1: If Windows Vista or 7 64-bit is already installed on your system, then you
must use the BIOS Update CD for the BIOS update.
--------------------------------------------------------------------------------
WHAT THIS PACKAGE DOES
This package updates the BIOS (including system program and Embedded
Controller program) stored in the ThinkPad computer to fix problems, add new
functions, or expand functions as noted below.
On Windows Vista and 7 64-bit, the BIOS itself is supported, however, this
package for BIOS update does not work.
This program is language independent and can be used with any language system.
--------------------------------------------------------------------------------
CHANGES IN THIS RELEASE
Version 2.27-1.08
[Important updates]
Nothing.
[New functions or enhancements]
- Added support for 1600x900 screen resolution on an external display.
- Added support for a SanDisk SSD.
[Problem fixes]
- Fixed an issue that might not be able to set HDP(HardDisk Password) by SRCMOS.
--------------------------------------------------------------------------------
DETERMINING WHICH VERSION IS INSTALLED
1. Turn off the computer.
2. Turn on the computer.
3. While the "To interrupt normal startup, press the blue ThinkVantage button"
message is displayed at the lower-left area of the screen, press the F1 key.
The BIOS Setup Utility menu will be displayed. If a password prompt appears,
type the correct password.
4. Check the BIOS Version and Embedded Controller Version.
5. Turn off the computer.
--------------------------------------------------------------------------------
NOTES
- If you update to the BIOS version 2.07-1.08 or later, you are not able to get
back to the older BIOS versions.
- This package does not work on Windows Vista, 7 64-bit systems. Use the BIOS
Update CD for BIOS updates for Windows Vista, 7 64-bit systems.
- If you use Windows Vista, before applying this BIOS into the system, you
should install Windows Vista KB 937500. The information of KB937500 is located
in the following Microsoft's site.
http://support.microsoft.com/kb/937500/en-us
To verify if KB937500 is installed properly,
1. Click Start, then click Control Panel.
2. Find 'Programs and Features' and click. If this option does not exist on
the window, choose Classic View to find it.
3. On 'Tasks' pane, click on "View installed updates".
4. Verify that KB937500 is included in the list of installed updates.
- (Limitation) The secondary hard disk with hard disk password may not be
detected when the following procedures are done on Windows Vista.
1. Set the hard disk password in a secondary hard disk.
2. Hot-attach the secondary hard disk to the computer.
3. Go into standby mode and then resume normal operation to let Windows Vista
recognize the hard disk.
4. Input the hard disk password when a password prompt for the secondary hard
disk appears.
5. After the Windows desktop appears, double-click the Computer icon. But, the
secondary hard disk may not be detected.
--------------------------------------------------------------------------------
UPDATING THE BIOS
Notes:
- If your computer runs satisfactorily now, it may not be necessary to update
the BIOS. To determine if you should update the BIOS, refer to the Version
Information section.
- You need an AC adapter and a charged battery pack.
- If your computer is attached to any kind of docking station or port replicator,
turn off the computer and detach it before proceeding.
- Remove the Power-on password prior to updating the BIOS in the RDM (Remote
Deployment Manager) or similar environment.
Attention:
Do not turn off or suspend the computer until the update has been completed.
IF YOU DO THAT WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY
HAVE TO BE REPLACED.
Manual Update
1. Firmly connect the AC adapter to the target computer.
2. Start Windows 7 32-bit, Vista 32-bit, XP, 2000 and logon with administrative
privileges on the target computer.
3. Double-click 7luj26us.exe to extract it to your hard drive.
The default location is C:\DRIVERS\FLASH\7luj26us.
4. For Windows 7 and Vista, click Start, select All Programs, select Accessories,
then click Run...
For Windows XP, click Start, then click Run...
5. Specify WINUPTP.EXE with the full path name where you saved the package,
then click OK.
Example: C:\DRIVERS\FLASH\7luj26us\WINUPTP.EXE
6. Follow the instructions on the screen.
7. Select 'Update ThinkPad BIOS' and follow the instructions on the screen.
8. After the update has been completed, the program shows a message 'Flash
Update has been successfully completed...'. Follow the instructions on the
screen to restart the computer.
Unattended Update
This procedure is intended only for system administrators. The BIOS is updated
without any user interaction.
- Refer to the Manual Update section, and download and extract the files.
- At the command line, execute WINUPTP.EXE with the -S option.
Example: C:\DRIVERS\FLASH\7luj26us\WINUPTP -s
To view the update result, refer to the WINUPTP.log file created at the same
directory of the package.
--------------------------------------------------------------------------------
INITIALIZING BIOS
BIOS Initialization is suggested for some problems. To initialize the BIOS
settings:
1. Turn off the computer.
2. Turn on the computer.
3. While the "To interrupt normal startup, press the blue ThinkVantage button"
message is displayed at the lower-left area of the screen, press the F1 key.
The BIOS Setup Utility menu will be displayed. If a password prompt appears,
type the correct password.
4. Press the F9 key to load default configuration.
5. Select Yes.
6. Press the F10 key to save default configuration and exit.
7. Select Yes.
8. Restart the computer.
Note:
After initialization you may need to reapply some settings that you had
changed previously.
--------------------------------------------------------------------------------
VERSION INFORMATION
The following versions of BIOS and ECP (Embedded Controller Program) have been
released to date.
Package BIOS (BIOS ID) ECP (ECP ID) Rev. Issue Date
--------- ---------------- ---------------- ---- ------------
2.27-1.08 2.27 (7LETC7WW) 1.08 (7KHT24WW) 01 2010/04/20
2.26-1.08 2.26 (7LETC6WW) 1.08 (7KHT24WW) 02 2009/10/22
2.26-1.08 2.26 (7LETC6WW) 1.08 (7KHT24WW) 01 2009/05/26
2.25-1.08 2.25 (7LETC5WW) 1.08 (7KHT24WW) 01 2008/11/27
2.24-1.08 2.24 (7LETC4WW) 1.08 (7KHT24WW) 19th release
2.23-1.08 2.23 (7LETC3WW) 1.08 (7KHT24WW) 18th release
2.20-1.08 2.20 (7LETC1WW) 1.08 (7KHT24WW) 17th release
2.19-1.08 2.19 (7LETB9WW) 1.08 (7KHT24WW) 16th release
2.18-1.08 2.18 (7LETB8WW) 1.08 (7KHT24WW) 15th release
2.17-1.08 2.17 (7LETB7WW) 1.08 (7KHT24WW) 14th release
2.14-1.08 2.14 (7LETB4WW) 1.08 (7KHT24WW) 13th release
2.10-1.08 2.10 (7LETB0WW) 1.08 (7KHT24WW) 12th release
2.09-1.08 2.09 (7LETA9WW) 1.08 (7KHT24WW) 11th release
2.07-1.08 2.07 (7LETA7WW) 1.08 (7KHT24WW) 10th release
1.27-1.08 1.27 (7LET57WW) 1.08 (7KHT24WW) 9th release
1.26-1.06 1.26 (7LET56WW) 1.06 (7KHT22WW) 8th release
1.22-1.06 1.22 (7LET52WW) 1.06 (7KHT22WW) 7th release
1.21-1.06 1.21 (7LET51WW) 1.06 (7KHT22WW) 6th release
1.14-1.06 1.14 (7LET44WW) 1.06 (7KHT22WW) 5th release
1.10-1.06 1.10 (7LET40WW) 1.06 (7KHT22WW) 4th release
1.09-1.05 1.09 (7LET39WW) 1.05 (7KHT21WW) 3rd release
1.07-1.04 1.07 (7LET37WW) 1.04 (7KHT20WW) 2nd release
1.07 1.07 (7LET37WW) 1.03 (7KHT19WW) 1st release
Note: Revision number (Rev.) is for administrative purpose of this README
document and is not related to software version. There is no need to
upgrade this software when the revision number changes.
To check the version of BIOS and Embedded Controller Program, refer to the
Determining which version is installed section.
Summary of Changes
Where: < > Package version
BIOS: BIOS version
ECP: Embedded Controller Program version
[Important] Important update
(New) New function or enhancement
(Fix) Correction to existing function
<2.27-1.08>
BIOS: 2.27 / ECP: 1.08
- (New) Added support for 1600x900 screen resolution on an external display.
- (New) Added support for a SanDisk SSD.
- (Fix) Fixed an issue that might not be able to set HDP(HardDisk Password)
by SRCMOS.
<2.26-1.08>
BIOS: 2.26 / ECP: 1.08
- (New) Supports Microsoft Windows 7. (addition)
<2.26-1.08>
BIOS: 2.26 / ECP: 1.08
- (Fix) Fixed an issue that might not recognize USB memory devices.
- (Fix) Fixed an issue where the USB memory device might cause boot failure.
- (Fix) Fixed an issue where the Intel AMT menu of BIOS Setup Utility might not
be displayed.
- (Fix) Fixed an issue where Intel Management Engine BIOS Extension (MEBx)
might not function.
- (Fix) Fixed an issue where the external display might have blank screen after
closing the lid "When I close the lid: Do nothing" was selected in
Power Options on Windows Vista.
- (Fix) Fixed an issue where the computer might not start when a new ThinkPad
Hard Drive Bay Adapter was installed in the Docking Station.
<2.25-1.08>
BIOS: 2.25 / ECP: 1.08
- (New) Added the option to disabling wireless switch in the BIOS setup.
- (New) Added PCI Express Power Management disabling capability in BIOS setup.
- (Fix) Fixed Mode Removable Table in the Video BIOS.
- (Fix) Boot priority order does not work on selecting AMT remote console.
- (Fix) Windows XP installation may stop responding on the way.
- (Fix) System reboot should be done for all Physical Presence I/F command
execution.
- (Fix) The computer with Smart Card Reader resumes normal operation from sleep
state unexpectedly.
- (Fix) The computer with RICOH CardBus Controller has slow data transfer
performance.
<2.24-1.08>
BIOS: 2.24 / ECP: 1.08
- (Fix) Intel GM965 Video BIOS was updated to v1668 to fix a blue screen error
issue on the Windows Vista.
<2.23-1.08>
BIOS: 2.23 / ECP: 1.08
- (Fix) Buzzing sound around the fan with battery.
- (Fix) The computer may hang if Rescue and Recovery is installed on Windows
Vista 64-bit SP1.
<2.20-1.08>
BIOS: 2.20 / ECP: 1.08
- (New) Support for Intel ICH-8 step B2 (added).
<2.19-1.08>
BIOS: 2.19 / ECP: 1.08
- (New) Support for ICH8 revision B2.
- (New) Support for Intel AMT Management Engine Region Firmware Update Utility
version 2.6.4.1034 (or higher).
- (Fix) The error, "0191 System Security-Invalid Remote Change requested." may
occur at the power-on.
- (Fix) Some CardBus and IEEE 1394 devices may slow down the performance.
<2.18-1.08>
BIOS: 2.18 / ECP: 1.08
- (New) Enhancement of security function.
<2.17-1.08>
BIOS: 2.17 / ECP: 1.08
- (Fix) The computer may hang while formatting CardBus ATA drive on Windows
Vista 64-bit SP1.
- (Fix) The screen resolution of the external display attached to the Docking
Station via an analog display port will be changed during undock/dock
operation (NVIDIA graphics chip models only).
(Note)
Use NVIDIA display driver version 6.14.11.7471 or higher.
<2.14-1.08>
BIOS: 2.14 / ECP: 1.08
- (New) Microcode updates of the processors.
- (New) Intel Memory Reference Code update.
- (New) Update of Intel AMT 2.6 Management Engine Region Firmware (the models
with Intel AMT 2.6 feature only).
- (New) Support for initialization command of SSD (Solid State Drive).
- (Fix) Boot error occurs at Intel ICH8M SATA initialization.
- (Fix) The error code 2100 (Hard disk drive 0 initialization error) is
displayed only occasionally after "Setup Default" is done in BIOS Setup
Utility.
- (Fix) The boot sequence is different from the expected one in case of Wake on
LAN (WOL).
- (Fix) Data of memory may get garbled during system boot or resume from
standby/hibernation mode/power-off (the models with Intel AMT 2.6
feature only).
<2.10-1.08>
BIOS: 2.10 / ECP: 1.08
- (New) Microcode updates of the processors.
- (New) Added the new BIOS Setup option to avoid system hang even if the AC
adapter is removed from the ThinkPad Advanced Mini Dock while the
computer is attached to it.
*How to enable:
Set the Legacy Devices on Mini-Dock option to 'Disabled' of Docking
Station of Config in BIOS Setup menu.
*Note:
A serial and a parallel port on the Mini-Dock will be disabled with
this setup.
<2.09-1.08>
BIOS: 2.09 / ECP: 1.08
- (Fix) Looks like system hang after continuous Fn-F7 hitting in the BIOS Setup
or DOS.
<2.07-1.08>
BIOS: 2.07 / ECP: 1.08
- (New) Added the new error code 1830 to indicate that a single DIMM is not
installed in the memory slot 0.
Solution for the error code:
With a single DIMM, install the DIMM into the memory slot 0 (a slot
different from having used it).
- (Fix) Unexpected interrupts from the USB controller may occur.
- (Fix) The system with NVIDIA graphics chip may cause hang.
- (Fix) No video output during pre-boot with "Boot Display Device=ThinkPad LCD"
and lid closed.
<1.27-1.08>
BIOS: 1.27 / ECP: 1.08
- (Fix) A Bluetooth LED is On on the computer without the Bluetooth card
installed.
- (Fix) POST 1805 error due to unknown Wireless USB card
- (Fix) The LCD brightness always becomes maximum level after Windows starts.
- (Fix) On PC Doctor for Windows PE, Multicore test result with CPU T7800
system is fail.
- (Fix) Blank display occurs when the system boots up with LID close, which an
external display is attached.
<1.26-1.06>
BIOS: 1.26 / ECP: 1.06
- (New) (Intel video models only) A design change that the screen is set to
extended desktop mode with an external display and "When I close the
lid of my portable computer" option in the power option is set to "Do
nothing", and when the lid is closed;
(Old) The extended display mode is canceled and video output is
switched to the external display only, so icons on the desktop
will be moved.
(New) The extended display mode is kept and video output is not
switched, so icons on the desktop are not moved.
- (New) Function enhancement of capturing the BIOS configuration information on
the computer by BIOS Settings Capture/Playback Utility.
- (Fix) The data transfer rate of hard drive is slow in SATA AHCI mode.
- (Fix) The computer may hang at the power-on if device configuration is
changed in the BIOS Setup immediately after resuming normal operation
from hibernation mode.
- (Fix) An error may occur at the power-on after ThinkPad BIOS Settings for
Windows runs and then the computer goes into hibernation mode.
- (Fix) WMIMGMT.MSC fails to read properties on Windows 2000.
- (Fix) (ThinkPad T61/T61p only) Volume and mute buttons on the keyboard do not
work on Linux.
- (Fix) (ThinkPad R61 only) Removed Intel AMT menu from the BIOS Setup:
The Intel AMT menu is shown in the BIOS Setup on some models although
the Intel AMT feature is not supported.
<1.22-1.06>
BIOS: 1.22 / ECP: 1.06
- (New) Optimize power management function for the nVIDIA Quadro NVS 140M
models.
- (Fix) Resume operation from hibernation may fail with Intel Turbo Memory on
Windows Vista.
- (Fix) Power-on password prompt may appear even if fingerprint authentication
was matched at power on timing.
<1.21-1.06>
BIOS: 1.21 / ECP: 1.06
- (Fix) Incorrect screen resolution may be configured when the system is
re-docked on the docking station.
<1.14-1.06>
BIOS: 1.14 / ECP: 1.06
- (New) Additional OS support for the nVIDIA Quadro NVS 140M models.
- (Fix) Unexpected display mode(s) may be selected with docking station on
Windows Vista.
- (Fix) Resume operation may fail on nVIDIA Quadro NVS 140M models.
- (Fix) System performance may become very low if the hard drive mode (Serial
ATA controller mode) is set to AHCI.
<1.10-1.06>
BIOS: 1.10 / ECP: 1.06
- (New) Support for ThinkPad R61/T61 new models.
<1.09-1.05>
BIOS: 1.09 / ECP: 1.05
- (New) Support for ThinkPad T61 14.1 inch normal screen models.
- (New) Support for ThinkPad T61 15.4 inch widescreen models.
- (Fix) Screen display mode setting may mismatch on Windows XP.
<1.07-1.04>
BIOS: 1.07 / ECP: 1.04
- (Fix) Trackpoint does not work after undocking from docking station with PS/2
mouse.
<1.07>
BIOS: 1.07 / ECP: 1.03
- (New) Initial release for ThinkPad T61 and R61 14.1 inch widescreen models
without IEEE 1394.
--------------------------------------------------------------------------------
BIOS INFORMATION
Memory Map Information
----------------------
Reserved Area:
The following conventional memory addresses are reserved by the BIOS and others.
(When Intel Turbo Memory is installed in your system, conventional memory
addresses are reserved 12 Kbytes more.)
nVIDIA Quadro NVS 140M models
C0000-CEFFF : Reserved for Video BIOS
CF000-D0FFF : Reserved for Option ROM of Ethernet (*a)
E0000-FFFFF : Reserved for System BIOS
nVIDIA Quadro FX 570M models
C0000-CF7FF : Reserved for Video BIOS
CF800-D17FF : Reserved for Option ROM of Ethernet (*a)
E0000-FFFFF : Reserved for System BIOS
Intel Graphics Media Accelerator GM965 models
C0000-CFFFF : Reserved for Video BIOS
D0000-D1FFF : Reserved for Option ROM of Ethernet (*a)
E0000-FFFFF : Reserved for System BIOS
Notes:
*a: This area becomes free by disabling the Ethernet LAN Option ROM option
under Config and Network in the BIOS Setup Utility. This choice will
disable PXE and WOL features.
Usable Area:
The following memory address can be used by the memory manager such as EMM386.
nVIDIA Quadro NVS 140M models
D1000-DFFFF
nVIDIA Quadro FX 570M models
D1800-DFFFF
Intel Graphics Media Accelerator GM965 models
D2000-DFFFF
Note: Certain addresses in this area will be reserved for CardBus Controllers
or others by Operating Systems. The addresses vary and depend on the
design of each Operating System.
--------------------------------------------------------------------------------
TRADEMARKS
* Lenovo, Rescue and Recovery, ThinkPad and ThinkVantage are registered
trademarks of Lenovo.
* Intel is a registered trademark of Intel Corporation.
* Microsoft, Windows and Windows Vista are registered trademarks of Microsoft
Corporation.
* NVIDIA and Quadro are registered trademarks of NVIDIA Corporation.
* RICOH is a registered trademark of RICOH Co., Ltd.
Other company, product, and service names may be registered trademarks,
trademarks or service marks of others. |
|
IP
发表于 2010-12-7 18:13
收藏
分享
变色卡
显身卡
楼主